Technical parameters

300kV electrostatic discharge simulator EDS 300B technical parameters

Maximum output voltage

300 kV (Scalable to 400kV)

Maximum current output

10 mA

Energy-storage capacitor

1000 pF

Discharge resistor

< 1Ω

Loop inductance

< 20 μH

Energy transfer efficiency

≥ 80%

Generator structure

Enclosed, removable chassis

Use power

AC 220 V 5 kVA

Technical parameters of deposition electrostatic and electrostatic discharge test tower HVFDJ 400B

Rack height

≥ 4 m, the discharge electrode height is continuously adjustable, and the stroke is ≥ 3 m

Discharge electrode expansion speed

The stepping speed is not greater than 0.03 m/s and is adjustable

Electrode elevation adjustable range

± 60°

Electrostatic discharge electrode

Hemispherical, diameter ≥ 10 cm

Deposition of electrostatic discharge electrodes

Needle shape, diameter 30 cm, discharge needle number ≥15

Contact discharge electrode

Conical, cone Angle < 45 degrees, diameter ≥10 cm

EDS 300B Random standard configuration

1

High voltage electrostatic generator

Model: EDS 300B

2

Electrostatic discharge test tower deposited charge test tower

Model: HVFDJ 400B
For the deposition charge test, support the connection of high voltage wire lifting height of 4 M, using air motor control

3

Electrostatic simulator control cabinet

Model: the EDS C300B
An elevator used in high voltage electrostatic generator is used to control the output voltage test of state switch remote control signal node is given

4

High voltage direct discharge electric rod

2 m to shrink for security grounding Ω 0 or 1 M Ω can switch

5

Control and measurement analysis system (software)

Model: CoreLab
The acquisition, reading and calculation of the waveform of attitude control test of deposition electrostatic and electrostatic discharge test tower

6

Separation filter

Model: EDS300 - DGL10
Need to use two, respectively connected computers and dso scope complete field data collected and transmitted through optical fiber isolation to computer maximum power 200 w (220 v)

7

Air compressor

Model: 1100 - 40( 3540 )
Pneumatic switching of test state of high voltage electrostatic generator; Attitude control of electrostatic deposition and electrostatic discharge test tower

8

Milliampere meter

Used to measure electrostatic discharge current of deposition

9

Outgoing report

10

Operating manual

EDS 300B optional

1

Shielded box

Model: LCG464C - PBX
Minimum shielding efficiency
60 dB @ f ≤ 100 MHz
30 dB @ 100 MHz ＜ f ＜ 1 GHz
20 dB @ 1 GHz ＜ f ≤ 3 GHz
230 V, 10 A (Φ 5 × 20) power filter

2

Oscilloscope

Model: Tektronix MDO32 3 - BW - 500
500 MHz Analog bandwidth
2.5GS / s sample rate

3

Broadband current monitoring pliers

Model: CM 0220M
Maximum instantaneous Current:20 kA，
Bandwidth:20 MHz 100:1

4

500 kV divider

Model: HV - 500
Impedance 3 g Ω loaded with 100 mu A leakage current for charging voltage calibration

5

Calibrated load impedance

Model: RFC - 100
Energy calibration 100 Ω low inductance built-in coaxial shunt impedance load 0.01 V/A, BNC output must be used with 50:1 attenuator

6

Discharge rack

Model: EDS300 - FDJ - B
Simulated load (SUT) for system debugging and demonstration

7

Ground rod (T-shaped)

For security grounding Ω 0 or 1 m Ω can connect