Introduction：
The CDN 418CAN coupling decoupling network is suitable for damping oscillation wave testing of CAN/LIN lines. Designed to meet the IEC/EN 61000-4-18 unshielded data cable standard. The decoupling performance and transmission rate are stable, and the small size makes it easy to carry and use. The transmission rate is 10MBit/s, and the powerful decoupling capability can protect the auxiliary equipment (AE) from the influence of damping oscillation waves, ensuring the repeatability of testing; The maximum residual voltage at the AE port during the 3kV damping oscillation test is only 25V
Features：
> Compatible with foreign generator output port incoming line testing;
> Auxiliary equipment does not require additional protection;
> Coupling mode: CAN H+CAN L simultaneous ground/LIN ground;
> Data rate: CAN 10 MBit/s, LIN 100 KBit/s.
|
Technical Parameters |
|
|
Standard |
IEC 61000-4-18 |
|
Coupled Waveform |
Damping oscillation wave at 100 kHz/1 MHz |
|
Pulse Voltage |
≥3 kV |
|
Coupling Mode |
CAN H+CAN L simultaneous ground/LIN ground |
|
Coupling Device |
External replaceable module (TVS) |
|
Communication Frequency |
<5 MHz |
|
Communication Interface Specifications |
4mm Banana Head (EUT) |
|
Data Rate |
CAN 10MBit/s 、LIN 100 KBit/s |
|
Working Voltage |
≤12 V DC |
|
Working Current |
Maximum 2 A |
|
Residual Voltage |
＜25V |
|
General Parameters |
|
|
Weight |
About 5 kg |
|
Size |
360 mm x 220 mm x 135 mm (length x width x height) |
|
Shell Material |
Aluminum material |
|
Ambient Temperature |
15 ℃ -35 ℃ (operating conditions) |
|
Relative Humidity |
45% -75% (operating conditions) |
