The INS 800 high-frequency noise simulator is designed to simulate the interference generated when the relay is turned on or off as a representative of the inductive component. This type of interference contains a wide spectrum (up to 2 GHz) that is coupled, reflected, resonated, and amplified by the IC through the wiring of the power line and the printed circuit board inside the device, causing equipment failure.
The device can be used to evaluate the performance of electronic equipment against transient conducted interference, and can qualitatively test the anti-radiation performance of the anti-interference performance of the electronic equipment system and the grounding performance of the system, and apply it most in various interference simulators. Wide, one of the most practical instruments.
Features：
> Floating output
> 5 scheduling tests
> Built-in 50 Ω termination resistor
> Manually select different pulse widths and coupling modes
> The coaxial short-circuit bar can easily realize the common differential mode test
> 5.7-inch color touch screen operation for PC interconnection
|
Technical Parameters |
||
|
Output Voltage |
0.1 kV ~ 4 kV±10 %， Built-in 50 terminal load |
|
|
Polarity |
Positive or negative |
|
|
Source Impedance |
50 Ω |
|
|
Rise Time |
＜1 ns |
|
|
Pulse Width |
50 ns ~ 1000 ns (50 ns step) |
|
|
Repetition Frequency |
20 Hz ~ 60 Hz, ±10 % |
|
|
Phase Sync |
0 ~ 359°,±10 %（only L1 - L2） |
|
|
EUT Capacity |
AC 240 V 16 A、DC 60 V 16 A |
|
|
Trigger Mode |
Manual, auto, external |
|
|
Test Time |
Max. 99 s |
|
|
General Parameters |
||
|
Mains Supply |
AC 110/220 V，土10%，50/60 Hz (default AC 220 V 50 Hz in mainland China) |
|
|
Ambient Temperature |
45 % ~ 75 %RH（no condensing） |
|
|
Relative Humidity |
15 ℃ ~ 35 ℃ |
|
|
Size |
21 inch，6 U |
|
|
Weight |
Approx. 30 kg |
|
|
Accessories |
|
|
User Manual, Test Line, Short-circuit Bar, Power Line, Earth Line, Coaxial Cable, Fuse*2 |
|
|
Optional Accessories |
|
|
1.Coupling/decoupling Network INSN 4032
|
AC 380 V Three-phase-5-line 32 A Input voltage 4000 V |
|
2.Coupling/decoupling Network INSN 4050
|
AC 380 V Three-phase-5-line 50 A Input voltage 4000 V |
|
3. Attenuator TFB 500
|
Output impedance：50 Ω Attenuation ratio：500:1 Freq. range：DC ~ 400 MHz |
|
4.Capacitive Coupling Clamp CCC 100(NMHV connection terminal)
|
Coupling capacitance: 100 pF ~ 1000 pF DC 8 kV Insulation＞8 kV( 1.2/50 μs) Dimension: 1040 ×140×110 mm |
|
5.Current Injection Clamp BCIP-400
|
Frequency： 10 kHz ~ 400 MHz Inner diameter：φ40 mm |
|
Isolation Transformer, Calibration Adaptor |
|
