Technical Parameters for LSS 160SM6

Technical Parameters—Current Waveform 1

Cable Bundle Cable Induction

For tests as per DO-160G S22, MIL-STD-461G CS117(WF2/1) etc.

Coupling Mode

Cable Induction (CI)

Output Module

W1 CI/GI

Current Waveform 1

6.4 μs ± 20 % / 69 μs ± 20 %

Single Stroke Output

50 A ~ 3500 A (-0%~+20%);

Output Impedance≤0.5 Ω

Multiple Stroke Output

50 A ~2000 A (-0%~+20%) (first stroke); Output Impedance≤1 Ω

25 A ~ 1000 A (-0%~+50%) (subsequent stroke);

Output Impedance≤1 Ω

Number of Subsequent Pulses

1 ~ 14 (or 1 ~ 30)

Interval Time of Subsequent Pulses

10 ms ~ 200 ms,

random mode is available

Polarity

positive or negative

Number of Test Times

1 ~ 99

Test Repetition

30 s ~ 60 s

Coupler

LCT- L5

Technical Parameters—Current Waveform 1

Cable Bundle Ground Injection

For tests as per DO-160G S22 etc.

Coupling Mode

Ground Injection (GI)

Output Module

W1 CI/GI

Current Waveform 1

6.4 μs ± 20 % / 69 μs ± 20 %

Single Stroke Output

50 A ~ 3500 A (-0%~+20%);

Output Impedance≤0.5 Ω

Multiple Stroke Output

50 A ~ 2000 A (-0%~+20%) (first stroke); Output Impedance≤1 Ω

25 A ~ 1000 A (-0%~+50%)  (subsequent stroke);

Output Impedance≤1 Ω

The Number of Subsequent pulses

1 ~ 14 (or 1 ~ 30)

Interval Time of Subsequent Pulses

10 ms ~ 200 ms,

random mode is available

Polarity

positive or negative

Number of Test Times

1 ~ 99

Test Repetition

30 s ~ 60 s

Maximum EUT Power Supply

AC 230 V / 32 A 50/60 Hz;

DC 230 V/32 A

Coupler

LCT- L5

Technical Parameters—Voltage Waveform 4

Signal Pins & Power Pins Direct Injection

For tests as per DO-160G S22 etc.

Coupling Mode

Pins Direct Injection (PDI)

Output Module

W4 PI

Output Impedance

5 Ω ± 10 %

Voltage/Current Waveform 4

6.4 μs ± 20 % / 69 μs ± 20 %

Output Voltage

50 V ~ 3400 V (-0%~+10%), (open circuit)

Output Current

10 A ~ 680 A (-0%~+10%),

(short circuit)

Polarity

positive or negative

Number of Test Times

1 ~ 99

Test Repetition

30 s ~ 60 s (shortest time depends on output amplitude)

EUT Power Supply

Max. 230 V

EUT Frequency

Max. 800 Hz

Power Blocking Device

Greater than peak value of signal or power voltage (optional)

Technical Parameters—Voltage Waveform 4

Cable Bundle Ground Injection

For tests as per DO-160G S22

Coupling Mode

Ground Injection (GI)

Output Module

W4 CI/GI

Voltage Waveform 4

6.4 μs ± 20 % / 69 μs ± 20 %

Single Stroke Output

50 V ~ 3400 V (-0%~+20%);

Output Impedance≥0.5 Ω

Multiple Stroke Output

25 V ~ 1000 V (-0%~+20%) (first stroke);

Output Impedance≥0.5 Ω

10 V ~ 500 V (-0%~+50%)  (subsequent stroke);

 Output Impedance≥0.5 Ω

Number of Subsequent pulses

1 ~ 14 (or 1 ~ 30)

Interval Time of Subsequent Pulses

10 ms ~ 200 ms,

random mode is also available

Polarity

positive or negative

Number of Test Times

1 ~ 99

Test Repetition

30 s ~ 60 s

EUT Power Supply

Max. AC 230 V / 32 A 50/60 Hz;

DC 230 V/32 A

Coupler

LVT-1

Technical Parameters—Voltage Waveform 4

Cable Bundle Cable Injection

For tests as per DO-160G S22, etc.

Coupling Mode

Cable Induction (CI)

Output Module

W4 CI/GI

Voltage Waveform 4

6.4 μs ± 20 % / 69 μs ± 20 %

Single Stroke Output

50 V ~ 3400 V (-0%~+20%);

Output Impedance≥0.5 Ω

Multiple Stroke Output

25 V ~ 1000 V (-0%~+20%) (first stroke);

Output Impedance≥0.5 Ω

10 V ~ 500 V (-0%~+50%) (subsequent stroke);

Output Impedance≥0.5 Ω

Number of Subsequent pulses

1 ~ 14(or 1 ~ 30)

Interval Time of Subsequent Pulses

10 ms ~ 200 ms,

random mode is also available

Polarity

positive or negative

Number of Test Times

1 ~ 99

Test Repetition

30 s ~ 60 s

Coupler

LVT-1

Technical Parameters—Voltage Waveform 5A

Signal Pins & Power Pins Direct Injection

For tests as per DO-160G S22

Coupling Mode

Pins Direct Injection（PDI）

Output Module

W5A PI

Output Impedance

1 Ω ± 10 %

Voltage/

Current Waveform 5A

40 μs ± 20 % / 120 μs ± 20 %

Output Voltage

50 V ~ 3200 V (-0%~+10%) （open circuit）

Output Current

50 A ~ 3200 A  (-0%~+10%) （short circuit）

Polarity

positive or negative

Number of Test Times

1 ~ 99

Test Repetition

30 s ~ 60 s (shortest time depends on output amplitude)

EUT Power Supply

Max. 230 V

EUT Power Frequency

Max. 800 Hz

Power Blocking Device

Greater than peak value of signal or power voltage (optional)

Technical Parameters—Current Waveform 5A

Cable Bundle Cable Induction

For tests as per DO-160G S22, MIL-STD-461G CS117(WF4/5A) etc.

Coupling Mode

Cable Induction (CI)

Output Module

W5A CI/GI

Current Waveform 5A

40 μs ± 20 % / 120 μs ± 20 %

Single Stroke Output

50 A ~ 10000 A (-0%~+20%);

Output Impedance≤0.3 Ω

Multiple Stroke Output

50 A ~ 2000 A (-0%~+20%) (first stroke);

Output Impedance≤0.3 Ω

25 A ~ 1000 A (-0%~+50%)  (subsequent stroke);

Output Impedance≤0.3 Ω

Number of Subsequent pulses

1 ~ 14 (or 1 ~ 30)

Interval Time of Subsequent Pulses

10 ms ~ 200 ms,

random mode is also available

Polarity

positive or negative

Number of Test Times

1 ~ 99

Test Repetition

30 s ~ 60 s

Coupler

LCT- L5

Technical Parameters—Current Waveform 5A

Cable Bundle Ground Injection

For tests as per DO-160G S22, MIL-STD-461, CS117 (WF4/5A) etc.

Coupling Mode

Ground Injection (GI)

Output Module

W5A CI/GI

Current Waveform 5A

40 μs ± 20 % / 120 μs ± 20 %

Single Stroke Output

50 A ~ 10000 A (-0%~+20%)

Output Impedance≤0.3 Ω

Multiple Stroke Output

50 A ~ 2000 A (-0%~+20%) (first stroke);

Output Impedance≤0.3 Ω

25 A ~ 1000 A (-0%~+50%)  (subsequent stroke);

Output Impedance≤0.3 Ω

Number of Subsequent pulses

1 ~ 14 (or 1 ~ 30)

Interval Time of Subsequent Pulses

10 ms ~ 200 ms,

random mode is also available

Polarity

positive or negative

Number of Test Times

1 ~ 99

Test Repetition

30 s ~ 60 s

EUT Power Supply

Max. AC 230 V / 32 A 50/60 Hz; DC 230 V/32 A

Coupler

LVT- 5

Technical Parameters—Voltage Waveform 5B

Signal Pins & Power Pins Direct Injection

For tests as per DO-160G S22 etc.

Coupling Mode

Pins Direct Injection（PDI）

Output Module

W5B PI

Output Impedance

1 Ω ± 10 %

Voltage/

Current Waveform 5B

50 μs ± 20 % / 500 μs ± 20 %

Single Stroke Output

50 V ~ 1600 V  (-0%~+10%) （open circuit）

50 A ~ 1600 A  (-0%~+10%) （short circuit）

Polarity

positive or negative

Number of Test Times

1 ~ 99

Test Repetition

30 s ~ 60 s (shortest time depends on output amplitude)

EUT Power Supply

Max. AC/DC 230 V

EUT Power Frequency

Max. 800 Hz

Power Blocking Device

Greater than peak value of signal or power voltage (optional)

Technical Parameters—Current Waveform 5B

Cable Bundle Cable Induction

For tests as per DO-160G S22

Coupling Mode

Cable Injection (CI)

Output Module

W5B CI/GI

Current Waveform 5B

50 μs ± 20 % / 500 μs ± 20 %

Single Stroke Output

50 A ~ 5000 A (-0%~+20%)

Output Impedance≤0.3 Ω

Multiple Stroke Output

50 A ~ 2000 A (-0%~+20%) (first stroke);

Output Impedance≤0.3 Ω

25 A ~ 1000 A (-0%~+50%)  (subsequent stroke);

Output Impedance≤0.3 Ω

Number of Subsequent pulses

1 ~ 14 (or 1 ~ 30)

Interval Time of Subsequent Pulses

30 ms ~ 200 ms,

random mode is also available

Polarity

positive or negative

Number of Test Times

1 ~ 99

Test Repetition

30 s ~ 60 s

Coupler

LCT ~ L5

Technical Parameters—Current Waveform 5B

Cable Bundle Ground Injection

For tests as per DO-160G S22

Coupling Mode

Ground Injection (GI)

Output Module

W5B CI/GI

Current Waveform 5B

50 μs ± 20 % /500 μs ± 20 %

Single Stroke Output

50 A ~ 5000 A (-0%~+20%);

Output Impedance≤0.3 Ω

Multiple Stroke Output

50 A ~ 2000 A (-0%~+20%) (first stroke)

Output Impedance≤0.3 Ω

25 A ~ 1000 A (-0%~+50%)  (subsequent stroke);

Output Impedance≤0.3 Ω

Number of Subsequent pulses

1 ~ 14 (or 1 ~ 30)

Interval Time of Subsequent Pulses

10 ms ~ 200 ms, random mode is also available

Polarity

positive or negative

Number of Test Times

1 ~ 99

Test Repetition

30 s ~ 60 s

EUT Power Supply

Max. AC 50/60 Hz 230 V / 32 A; DC 230 V/32 A

Coupler

LCT -L5

List of waveform module and test type

Waveform Module

Test type

W1 CI/GI

Current waveform 1 – cable bundle cable induction test

Current waveform 1 – cable bundle ground injection test

W4 PI

Voltage waveform 4 – signal pins & power pins direct injection method

W4 CI/GI

Voltage waveform 4 - cable bundle cable induction test

Voltage waveform 4 - cable bundle ground injection test

W5A PI

Voltage waveform 5A – signal pins & power pins direct injection method

W5A CI/GI

Current waveform 5A – cable bundle cable induction test

Current waveform 5A – cable bundle ground injection test

W5B PI

Voltage waveform 5B – signal pins & power pins direct injection method

W5B CI/GI

Current waveform 5B – cable bundle cable induction test

Current waveform 5B – cable bundle ground injection test

Technical Parameters for ETS 160MB

Technical Parameters—Voltage Waveform 2

Cable Bundle Cable Induction Tests

Coupling Mode

Cable Induction

Rise Time

< 100 ns

Duration

6.4 µs ± 20%

Test Level for Single Stroke Tests

50 V ~ 2000 V +20%, -0%

Test Level for Multiple Stroke Tests

50 V ~ 2000 V +20%, -0% (first stroke)

25 V ~ 1000 V +50%, -0% (subsequent stroke)

Polarity

Positive or negative

Coupling Transformer

LVT-2

Technical Parameters—Voltage Waveform 3 (1MHz)  Signal Pins & Power Pins Injection Tests

Coupling Mode

Pin injection

Output Impedance

25 Ω

Frequency

1 MHz± 20 %

Decay Rate of  5th Waveshape

25% ~ 75%

Test Level for Single Stroke Tests

100 V ~ 4500 V +10%, -0%

4 A ~ 180 A +10%, -0% （short-circuit current）

Polarity

Positive or negative

Phase Sync

0° ~ 359°, resolution 1°

EUT Power Supply

Max. AC 230 V, DC ±50 V

EUT Power Frequency

800 Hz

Technical Parameters—Voltage Waveform 3     (1 MHz-H) Cable Bundle Cable Induction Multiple Burst

Coupling Mode

Cable Induction

Frequency

1 MHz± 20 %

Decay Rate of  5th Waveshape

25% ~ 75%

Output Impedance

≥60 ohm

Coupling Transformer

LVT-2

Technical Parameters—Voltage Waveform 3     (1 MHz) Cable Bundle Cable Induction Tests

Coupling Mode

Cable Induction

Frequency

1 MHz± 20%

Decay Rate of   5th Waveshape

25% ~ 75%

Test Level for Single Stroke Tests

50 V ~ 4500 V +20%, -0%

Test Level for Multiple Stroke Tests

50 V ~ 4500 V +20%, -0% (first stroke)

50 V ~ 2250 V +50%, -0% (subsequent stroke)

Polarity

Positive or negative

Coupling Transformer

LVT-2

Technical Parameters—Voltage Waveform 3     (10 MHz) Cable Bundle Cable Induction Tests

Coupling Mode

Cable Induction (CI)

Frequency

10 MHz± 20 %

Decay Rate of   5th Waveshape

25% ~ 75%

Test Level for Single Stroke

50 V ~ 4000 V +20%, -0%

Test Level for Multiple Stroke

50 V ~ 4000 V +20%, -0% (first stroke)

50 V ~ 2000 V +50%, -0% (subsequent stroke)

Polarity

Positive or negative

Coupling Transformer

LVT-2

Technical Parameters—Current Waveform 6     Cable Bundle Cable Induction Tests

Coupling Mode

Cable Induction

Current Waveform

5 A ~ 160 A

Rise Time

0.25 μs ±20%

Duration

4 μs ±20%

Coupling Transformer

LVT-3

General parameters

Display

5.7” TFT touch screen

Working Power

220 V，±10%，50/60Hz

Fuse

10 A

User’s Memory Space

Infinite (PC)

Communication Mode

Ethernet LAN, RJ45

Working Status Indication

LED indication and LCD display on front panel

Grounded Connection

Flat earth line

Waveform Output Terminal

Banana plug line

Dimension

LSS 160SM6:

600 mm(L) x 800 mm(W) x1800 mm(H) (35U rack)

ETS 160MB:

445 mm(L) x 690 mm(W) x600 mm(H) (4U×2)

Weight

LSS 160SM6: Approx. 150 kg

ETS 160MB: 37 kg

Ambient Temperature

15 ℃ ~ 35 ℃

Relative Humidity

45% ~ 75%

Atmospheric Pressure

86 kPa ~ 106 kPa

Accessories

Fuse, Power line, Flat ground line, Test line, alligator clip, User Manual, Coaxial line

Options (LSS 160SM6)

1. Line Impedance Stabilization Network

LISN AR 50

The LISN AR 50 is used for isolating electric wave in cable bundle test and supply stable impedance for test system;

Max AC 530 V, DC 600 V      I _rms: 50 A;

Frequency Range: 10 kHz ~

400 MHz;

2. Current Coupling Transformer

 LCT-L5

The LCT-L5 is used for coupling current waveforms 1,5A,5B and meet the test requirement of single/multiple stroke (level 1~5) test;

3. External DC Capacitor

C3350 /C33400

The C3350/C33400 is used together with LISN for conducting cable bundle tests; Maximum DC voltage is 400 V (general configuration is 50 V);

Capacitance: 33000 μF;

4. Voltage Coupling Transformer

LVT-L5

The LVT-1 is used for coupling voltage waveforms 4, 5A and meet the test requirement of single/multiple stroke (level 1 ~ 5) test;

5. Power Blocking Device

CN-1

The CN-1 is used to isolate voltages at the pins of the EUT from the low generator impedance so as to protect the generator;

The maximum isolating ac/dc voltage is 400 V;

Meet the test requirement of powered EUT for conducting pins injection test of waveforms 4, 5A, 5B;

6. Transient Blocking Device DN-416T

The DN-416T is used to prevent EUT power supply from being damaged by pulses 4, 5A and 5B;

EUT Maximum ac/dc power supply is 400 V 16 A three-phase, 0 ~ 400 Hz (common mode);

Meet the test requirement of powered EUT for conducting pins injection test of waveforms 4, 5A, 5B;

Note: Both LSS 160SM6 and ETS 160MB share the DN-416T.

7. Transient Blocking Device DN-4200T

The DN-4200T is used to prevent EUT power supply from being damaged by waveforms 4, 5A and 5B;

Maximum AC/DC power supply is 400 V 200 A three phase, 50/60 Hz (common mode);

Meet the test requirement of powered EUT for conducting pins injection test of waveforms 4, 5A, 5B;

8.Digital Oscilloscope MDO3012 (Tektronix)

Frequency 100 MHz;

Sample Rate 1.25 GS/s;

Record length 10 Mb;

Note: Both LSS 160SM6 and ETS 160MB share the MDO3012.

9. Wide-band Current Monitor

CM 0302M

The CM 0302M is used to measure W1, W4 and W5A/5B;

Max. peak current 200 kA;

Sensitivity 0.001 V/A;

Frequency: 5 Hz ~ 2 MHz

Current time product: 10 A·s;

10. Differential Probe

THDP0100

(Tektronix)

6 kV differential mode, 100 MHz;

The THDP0100 is used for measuring voltage of all waveforms

Note: Both LSS 160SM6 and ETS 160MB share the THDP0100.

11. Corelab Software

The software is used for remote control;

Support connection with oscilloscope for monitoring waveforms;

support generating test report;

Note: Both LSS 160SM6 and ETS 160MB share the Corelab software.

Options (ETS 160MB)

1.  Coupling Transformer LVT-2

The LVT-2 is used to couple voltage of waveform 2 and waveform 3 (1 MHz & 10 MHz);

It satisfies single stroke, multiple stroke and multiple burst tests of cable bundle; Test level is from 1 to 5;

Max. coupling voltage is 2000 V for W2;

Max. coupling voltage is 4000 V for W3;

2.  Coupling Transformer LVT-3

The LVT-3 is used to couple current of waveform 6;

It satisfies multiple burst tests of cable bundle; Test level is from 1 to 5;

Max. coupling current is 160 A;

3.  Power Blocking Device

CN-2

The CN-2 is used to isolate voltages at the pins of the EUT from the low generator impedance in waveform 3 pins direct injection test;

4.  Handheld Pin Injection Probe

HIP 5000

The probe is used in pin injection tests of waveform 3 (1 MHz);

Handheld structure design makes pin injection tests convenient;

5.  Current Divider MCS 01

The MCS 01 is used to measure current of waveforms 2, 3 and 6.

6.   Wide-band Current Monitor

CM 0103M

The CM 0103M is used to measure W2, W3(1 & 10 MHz) and W6;

Max. peak current 5 kA;

Sensitivity 0.1 V/A;

Frequency: 200 Hz ~ 20 MHz

Current time product: 0.2 A·s;

7.  35U rack

ETS 160MB-35U

The ETS 160MB-35U is used to place all devices and accessories to makes the storage in order;

There are two main unit storage tanks and four waveform input modules storage tanks, and each tank having sliding rail, which makes it easy to insert or pull out the modules;