Technical Parameters—Current Waveform 1

Cable Bundle and Ground Induction

For Tests As Per DO-160G S22, MIL-STD-461G CS117(WF2/1)

Coupling Mode

Cable induction (CI)

Ground injection (GI)

Output Module

W1 CI/GI

Current Waveform 1

6.4 μs ± 20% / 69 μs ± 20%

Single Stroke Output

50 A ~ 4200 A (-0%~+20%);

Output impedance≤0.5 Ω

Multiple Stroke Output

50 A ~2000 A (-0%~+20%) (first stroke); output impedance≤0.5 Ω

25 A ~ 1000 A (-0%~+50%) (subsequent stroke);

Output Impedance≤0.5 Ω

Number of Subsequent Pulses

1 ~ 14

Interval Time of Subsequent Pulses

10 ms ~ 200 ms,

Random mode is available

Polarity

Positive or negative

Number of Test Times

1 ~ 99

Test Repetition

10 s ~ 99 s (shortest time depends on output amplitude)

Coupler

LCT- L5B

Maximum EUT Power Supply

Cable Induction (CI):none

Ground Injection (GI):

AC 230 V / 32 A 50/60 Hz;

DC 230 V/32 A

Output Module

WAVE 1 CI/GI IH

Single Stroke Output

50 A ~ 3200 A (-0%~+20%);

Multiple Stroke Output

50 A ~ 1600 A (-0%~+20%) (first stroke)

25 A ~ 800 A (-0%~+50%) (subsequent stroke);

Technical Parameters—Voltage Waveform 5A

Signal Pins & Power Pins Direct Injection

For Tests As Per DO-160G S22

Coupling Mode

Pins direct injection（PDI）

Output Module

W5A PI

Output Impedance

1 Ω ± 10 %

Voltage/

Current Waveform 5A

40 μs ± 20 % / 120 μs ± 20 %

Output Voltage

50 V ~ 3000 V (-0%~+10%) （open circuit）

Output Current

50 A ~ 3000 A (-0%~+10%) （short circuit）

Polarity

Positive or negative

Number of Test Times

1 ~ 99

Test Repetition

10 s ~ 99 s (shortest time depends on output amplitude)

EUT Power Supply

Max. 230 V

EUT Power Frequency

Max. 800 Hz

Power Blocking Device

Greater than peak value of signal or power voltage (optional)

Technical Parameters—Voltage Waveform 4

Signal Pins & Power Pins Direct Injection

For Tests As Per DO-160G S22

Coupling Mode

Pins direct injection (PDI)

Output Module

W4 PI

Output Impedance

5 Ω ± 10 %

Voltage/Current Waveform 4

6.4 μs ± 20% / 69 μs ± 20%

Output Voltage

50 V ~ 3000 V (-0%~+10%), (open circuit)

Output Current

10 A ~ 600 A (-0%~+10%),

(short circuit)

Polarity

Positive or negative

Number of Test Times

1 ~ 99

Test Repetition

10 s ~ 99 s (shortest time depends on output amplitude)

EUT Power Supply

Max. 230 V

EUT Frequency

Max. 800 Hz

Power Blocking Device

Greater than peak value of signal or power voltage (optional)

Technical Parameters—Voltage Waveform 4

Cable Bundle and Ground Injection

For Tests As Per DO-160G S22

Coupling Mode

Cable induction (CI)

Ground injection (GI)

Output Module

W4 CI/GI

Voltage Waveform 4

6.4 μs ± 20% / 69 μs ± 20%

Single Stroke Output

50 V ~ 3000 V (-0%~+20%);

Output impedance≥0.5 Ω

Multiple Stroke Output

25 V ~ 1000 V (-0%~+20%) (first stroke);

Output impedance≥0.5 Ω

10 V ~ 500 V (-0%~+50%)  (subsequent stroke);

 Output impedance≥0.5 Ω

Number of Subsequent pulses

1 ~ 14

Interval Time of Subsequent Pulses

10 ms ~ 200 ms,

Random mode is also available

Polarity

Positive or negative

Number of Test Times

1 ~ 99

Test Repetition

10 s ~ 99 s (shortest time depends on output amplitude)

Coupler

LVT-L5B

Maximum EUT Power Supply

Cable induction (CI):none

Ground injection (GI):

AC 230 V / 32 A 50/60 Hz;

DC 230 V/32 A

Technical Parameters—Current Waveform 5A

Cable Bundle and Ground Induction

For Tests As Per DO-160G S22, MIL-STD-461G CS117(WF4/5A)

Coupling Mode

Cable induction (CI)

Ground injection (GI)

Output Module

W5A CI/GI

Current Waveform 5A

40 μs ± 20% / 120 μs ± 20%

Single Stroke Output

50 A ~ 10000 A (-0%~+20%);

Output impedance≤0.3 Ω

Multiple Stroke Output

50 A ~ 2000 A (-0%~+20%) (first stroke);

Output impedance≤0.3 Ω

25 A ~ 1000 A (-0%~+50%)  (subsequent stroke);

Output impedance≤0.3 Ω

Number of Subsequent pulses

1 ~ 14

Interval Time of Subsequent Pulses

10 ms ~ 200 ms,

Random mode is also available

Polarity

Positive or negative

Number of Test Times

1 ~ 99

Test Repetition

10 s ~ 99 s (shortest time depends on output amplitude)

Coupler

LCT- L5B

Maximum EUT Power Supply

Cable induction (CI):none

Ground injection (GI):

AC 230 V / 32 A 50/60 Hz;

DC 230 V/32 A

Technical Parameters—Voltage Waveform 5B

Signal Pins & Power Pins Direct Injection

For Tests As Per DO-160G S22

Coupling Mode

Pins direct injection（PDI）

Output Module

W5B PI

Output Impedance

1 Ω ± 10%

Voltage/

Current Waveform 5B

50 μs ± 20% / 500 μs ± 20%

Single Stroke Output

50 V ~ 1600 V (-0%~+10%) （open circuit）

50 A ~ 1600 A (-0%~+10%) （short circuit）

Polarity

Positive or negative

Number of Test Times

1 ~ 99

Test Repetition

10 s ~ 99 s (shortest time depends on output amplitude)

EUT Power Supply

Max. AC/DC 230 V

EUT Power Frequency

Max. 800 Hz

Power Blocking Device

Greater than peak value of signal or power voltage (optional)

Technical Parameters—Current Waveform 5B

Cable Bundle and Ground Induction

For Tests As Per DO-160G S22

Coupling Mode

Cable injection (CI)

Ground injection (GI)

Output Module

W5B CI/GI

Current Waveform 5B

50 μs ± 20% / 500 μs ± 20%

Single Stroke Output

50 A ~ 5000 A (-0%~+20%)

Output impedance≤0.3 Ω

Multiple Stroke Output

50 A ~ 2000 A (-0%~+20%) (first stroke);

Output impedance≤0.3 Ω

25 A ~ 1000 A (-0%~+50%)  (subsequent stroke);

Output impedance≤0.3 Ω

Number of Subsequent pulses

1 ~ 14

Interval Time of Subsequent Pulses

30 ms ~ 200 ms,

Random mode is also available

Polarity

Positive or negative

Number of Test Times

1 ~ 99

Test Repetition

10 s ~ 99 s (shortest time depends on output amplitude)

Coupler

LCT - L5B

Maximum EUT Power Supply

Cable induction (CI):none

Ground injection (GI):

AC 230 V / 32 A 50/60 Hz;

DC 230 V/32 A

List Of Waveform Module and Test Type

Waveform Module

Test type

W1 CI/GI;

W1-CI/GI-IH

Current waveform 1 – cable bundle cable induction test

Current waveform 1 – cable bundle ground injection test

W4 PI

Voltage waveform 4 – signal pins & power pins direct injection method

W4 CI/GI

Voltage waveform 4 - cable bundle cable induction test

Voltage waveform 4 - cable bundle ground injection test

W5A PI

Voltage waveform 5A – signal pins & power pins direct injection method

W5A CI/GI

Current waveform 5A – cable bundle cable induction test

Current waveform 5A – cable bundle ground injection test

W5B PI

Voltage waveform 5B – signal pins & power pins direct injection method

W5B CI/GI

Current waveform 5B – cable bundle cable induction test

Current waveform 5B – cable bundle ground injection test

Technical Parameters—Intermediate Width Pulse (IP) Waveform 1

For Tests As Per GJB 8848

Coupling Mode

Ground injection (GI)

Output Module

W1 I

Current Waveform

6.4 μs ± 20% / 69 μs ± 20%

Output current

50 A ~ 4000 A (± 10%);

Polarity

Positive or negative

Number of Test Times

1 ~ 99

Test Repetition

8 s ~ 99 s (shortest time depends on output amplitude)

Coupler

LCT- L5B

Technical Parameters—Intermediate 

width pulse (IP) Waveform 4

For Tests As Per GJB 8848

Coupling Mode

Ground injection (GI)

Output Module

W4 V

Waveform

6.4 μs ± 20% / 69 μs ± 20%

Voltage Output

50 V ~ 2500 V (± 10%);

Polarity

Positive or negative

Number of Test Times

1 ~ 99

Test Repetition

10 s ~ 99 s (shortest time depends on output amplitude)

Technical Parameters— Long Pulse (LP) Waveform 5A

For Tests As Per GJB 8848

Coupling Mode

Ground injection (GI)

Output Module

W5A V

Waveform

40 μs ± 20% / 120 μs ± 20%

Voltage Output

1000 V ~ 2500 V (± 10%);

Polarity

Positive or negative

Number of Test Times

1 ~ 99

Test Repetition

10 s ~ 99 s (shortest time depends on output amplitude)

Technical Parameters—Long Pulse (LP)

Waveform 5A

For Tests As Per GJB 8848

Coupling Mode

Ground injection (GI)

Output Module

W5A I

Current Waveform

40 μs ± 20% / 120 μs ± 20%

Output current

1000 A ~ 14000 A (± 10%);

Polarity

Positive or negative

Number of Test Times

1 ~ 99

Test Repetition

10 s ~ 99 s (shortest time depends on output amplitude)

Coupler

LCT- L5B

Technical Parameters— Long Pulse (LP) Waveform 5B

For Tests As Per GJB 8848

Coupling Mode

Ground injection (GI)

Output Module

W5B V

Waveform

50 μs ± 20% / 500 μs ± 20%

Voltage Output

1000 V ~ 2200 V (± 10%);

Polarity

Positive or negative

Number of Test Times

1 ~ 99

Test Repetition

10 s ~ 99 s (shortest time depends on output amplitude)

Technical Parameters—Long pulse (LP)

Waveform 5B

For Tests As Per GJB 8848

Coupling Mode

Ground injection (GI)

Output Module

W5B I

Current Waveform

50 μs ± 20% / 500 μs ± 20%

Output current

1000 A ~ 10000 A (± 10%);

Polarity

Positive or negative

Number of Test Times

1 ~ 99

Test Repetition

8 s ~ 99 s (shortest time depends on output amplitude)

Coupler

LCT- L5B

General Parameters

Display

5.7 inch TFT touch screen

Working Power

220 V，±10%，50/60Hz

Fuse

10 A

User’s Memory Space

Infinite (PC)

Communication Mode

Ethernet lan, RJ45

Working Status Indication

LED indication and LCD display on front panel

Grounded Connection

Flat earth line

Waveform Output Terminal

Banana plug line

Dimension

35U cabinet

Weight

Approx. 320 kg

Ambient Temperature

15 ℃ ~ 35 ℃

Relative Humidity

45% ~ 75%

Atmospheric Pressure

86 kPa ~ 106 kPa

Accessories

Fuse, Power Line, Flat Ground Line, Test Line, Alligator Clip, User Manual

Options

1. Line Impedance Stabilization Network

LISN AR 50

The LISN AR 50 is used for isolating electric wave in cable bundle test and supply stable impedance for test system;

Max AC 530 V, DC 600 V     

I _rms: 50 A;

Frequency Range: 10 kHz ~

400 MHz.

2. Current Coupling Transformer

 LCT-L5

The LCT-L5 is used for coupling current waveforms 1,5A,5B and meet the test requirement of single/multiple stroke (level 1~5) test.

3. External DC Capacitor

C33600 / C33500 /C33400

The C33600/C33500/C33400 is used together with LISN for conducting cable bundle tests; Maximum DC voltage is 600 V (general configuration is 50 V);
Capacitance: 33000 μF.

4. Voltage Coupling Transformer

LVT-L5B

The LVT-L5 is used for coupling voltage waveforms 4, 5A and meet the test requirement of single/multiple stroke (level 1 ~ 5) test.

5. Power Blocking Device

CN-1

Used to isolate the voltage on the EUT pin from the low source impedance of the signal generator, protecting the signal generator;
Isolation AC maximum voltage 400 V;
The maximum voltage of the DC power supply is 600 V;
Can meet the power testing requirements for injecting W4, W5A, and W5B waveforms into the pins;

6. Transient Blocking Device DN-416T

Used to prevent W4, W5A, W5B transient waveforms from damaging the EUT power supply;
AC/power supply maximum voltage 3-phase 400 V 16A, 0-400 Hz (common mode);
DC power supply with a maximum voltage of 600 V 16 A; 

Can meet the power testing requirements for injecting W4, W5A, and W5B waveforms into the pins;

7.Digital Oscilloscope MDO3012 (Tektronix)

Frequency 100 MHz;

Sample Rate 1.25 GS/s;

Record length 10 Mb.

8 Wide-band Current Monitor CWT 150

Max. peak current 30 kA;

Frequency: 0.2 Hz ~ 12 MHz

9. Differential Probe

THDP0100

(Tektronix)

6 kV differential mode, 100 MHz;

The THDP0100 is used for measuring voltage of all waveforms.

10. Long Pulse Adapter Box ZJH8848L

Used for measuring waveforms W1,W4,W5A and W5B.

11. Short Pulse Adapter Box ZJH8848S

Used to measure waveform W2.

12. Corelab Software

The software is used for remote control;

Support connection with oscilloscope for monitoring waveform;

Support generating test report.