Technical Parameters – EFT/Burst

3-Phase Automatic CDN

(As per IEC/EN 61000-4-4)

Max. test voltage: 4.2 kV

(Note: the actual output voltage is subject to the set value of the generator)

Phase Sync

Any combination of L1, L2, L3, N, PE with any phases and angles

Coupling Paths

Any combination of L1, L2, L3, N, PE

DC Coupling Route

L1 、N

Switching of Coupling Paths

Automatic as per scheduled

Coupling Capacitance

33 nF

Coupling Attenuation

< 2 dB

Residue Impulse Voltage at EUT Input End

≤ 10 % of test voltage;

Technical Parameters - Surge

3-Phase Automatic CDN

As per IEC/EN 61000-4-5,

Max test voltage: 6.0 kV (1.2/50 μs),

Max. test current: 3.0 kA (8/20 μs)

(Note: the actual output voltage is subject to the set value of the generator)

Phase Sync

Any combination of L1, L2, L3, N, PE with any phases and angles

Coupling Paths

Any combination of L1, L2, L3, N, PE

Switching of Coupling Paths

Automatic as per scheduled

Coupling Capacitance

9 μF, 18 μF  

Coupling Resistance

10Ω, 0Ω (standard or user-defined)

Coupling Attenuation

< 2 dB

Residual Impulse Voltage at EUT Input Terminal

≤ 15 % of test voltage or 2 times of rated peak voltage of CDN;

General Parameters

EUT Load Capacity

Max AC 450 V 100 A 50 Hz / 60 Hz three-phase-five-wire

Max DC 600 V 100 A

EUT Power Switching Mode

Automatic switching

Short-term Inrush Current

Peak value 400 A

Working Power

Source of EMC Immunity Test System

AC 110 V/220 V±10%，50 Hz /60 Hz±5%  (AC 220 V 50 Hz in mainland China)

Fuse

6 A

Max. Power Consumption

200 W

Auxiliary Interface

D-sub 25p

Working Status Indication

LED indication on front panel

Grounded Mode

Flat grounded wire

Dimension

19"/35 U

Weight

Approx. 200 kg

Ambient Temperature

15 ℃ ~ 35 ℃

Relative Humidity

45 % ~ 75 %

Atmospheric Pressure

86 kPa ~ 106 kPa

Accessories

User manual, Test line, 3-core Power line, Grounding line, Fuse (spare parts), Coaxial cable, CN25 Line

Optional Generators & Calibration Tools

EFT 500x

EFT/Burst generator, as per IEC 61000-4-4, max. burst output voltage 4.8 kV

EFT 600x

EFT/Burst generator, as per IEC 61000-4-4, max. burst output voltage 6.0 kV

EFT 500x

EFT/Burst generator, as per IEC 61000-4-4, max. burst output voltage 7.0 kV

CWS 600x

Surge generator; as per IEC 61000-4-5; max. pulse output voltage 6.0 kV (1.2/50 μs), output current 3.0 kA (8/20 μs)

CWS 800x

Surge generator; as per IEC 61000-4-5; max. pulse output voltage 8.0 kV (1.2/50 μs), output current 4.0 kA (8/20 μs)

CWS 1000x

Surge generator; as per IEC 61000-4-5; max. pulse output voltage 10.0 kV (1.2/50 μs), output current 5.0 kA (8/20 μs)

CCS 600x

Surge and EFT/Burst generator;

As per IEC 61000-4-4, max burst output voltage is 4.8 kV

As per IEC 61000-4-5, max. pulse output voltage 6.0 kV (1.2/50 μs), output current 3.0 kA (8/20 μs)

CCS 1000x

Surge and EFT/Burst generator;

As per IEC 61000-4-4, max burst output voltage is 4.8 kV

As per IEC 61000-4-5, max. pulse output voltage 10.0 kV (1.2/50 μs), output current 5.0 kA (8/20 μs)

VCF-80

HV differential probe, for calibration of Surge generator (open-circuit voltage waveform);

test voltage max 8 kV, attenuation: 1000:1;

TR 5025

HV current transducer, for calibration of Surge generator (short-circuit current waveform);

Test current max 20 kA, attenuation 100:1;

Calibration Kit for EFT/Burst Generators

TFB 50: input impedance 50 Ω, output impedance 50 Ω, attenuation 55 dB;

TFB 1000: input impedance 1000 Ω, output impedance 50 Ω, attenuation 60 dB;

Supplied with network adaptors and tool box.