|
Technical parameters |
|
|
Contact discharge |
200 V – 30,000 V, +/-5% |
|
Air discharge |
200 V – 30,000 V, +/-5% |
|
Voltage step |
100 V |
|
Holding time |
> 5 s |
|
Polarity |
+/- |
|
RC module recognition |
Automatic recognition and LCD display |
|
Temperature and humidity |
Built-in thermo-hygrometer with record and protection function |
|
Pulse repetition rate |
single/0.1/0.2/0.5/1/2/5/10/20 Hz |
|
Trigger mode |
manual& auto |
|
Pulse counter |
1-9999 |
|
Discharge module |
330 pF / 2000 Ω 150 pF / 2000 Ω 330 pF / 330 Ω 150 pF / 330 Ω |
|
Rising time |
0.7-1.0 ns |
|
Evaluate procedure |
Contact discharge test at 20 Hz，evaluate the test points of DUT |
|
General parameters |
|
|
Total Weight |
Approx.12.0 kg |
|
Weight (EDS gun) |
Approx.2.0 kg |
|
Environment temperature |
15 ℃ - 35 ℃（operating conditions） |
|
Relative humidity |
30%-60%（operating conditions） |
|
Air pressure |
86 kPa-106 kPa |
|
Working power supply |
100 V - 240 V +/-10%, 50/60 Hz |
|
Standard Equipped |
|
|
1.Discharge Gun
|
Discharge gun and control (1 pc) |
|
2.High Voltage Generator
|
High voltage power supply with programmable control (1 pc) |
|
3.Standard RC Module
|
330 pF / 2000 Ω; 150 pF / 2000 Ω; 330 pF / 330 Ω; 150 pF / 330 Ω; RC module is detachable |
|
4.Discharge Tip
|
Contact discharge tip |
|
5.Discharge Tip
|
Air discharge tip |
|
6.Grounding Wire |
2 m |
|
7.Package |
Suitcase |
|
8.Documents |
Factory calibration report and user manual |
|
Optional Accessories |
|
|
1.RC Module
|
100 pF/1500 ohm (EDS) 150 pF/150 ohm (EDS) 500 pF/500 ohm (EDS) 500 pF/5000 ohm (EDS) 200 pF/0 ohm (EDS) 500 pF/0 ohm (EDS) 500 pF/100 ohm (EDS) Support other RC modules customization |
|
2.30 mm Air Discharge Tip EDS 30T-AIR (30mm)
|
For 15 kV to 30 kV test |
|
3. Battery Box EDS01
|
8*2600 mAh, Ni-MH charging battery, around 8h for contact discharge with +30 kV, 1 Hz, Dimension 140 mm x100 mm x35 mm. weight 0.5 kg |
|
4.Battery Charger
|
Charging for battery box EDS01 |
|
5.Electrostatic Discharge Test Setup
|
Grounding high voltage resistor: 2x470 kohm |
|
Vertical coupling plane: 500 x 500 mm |
|
|
Horizontal coupling plane: 1600 x 800 mm |
|
|
Grounding reference plane: 2700 x 1800 mm |
|
|
Test table: 1600 x800 x 800 mm, fully wooden, as per IEC 61000-4-2 |
|
|
6. ESD calibration set ESD-CALA
|
Used for calibration waveforms as per ISO 10605, including 2 ohm target/4 GHz, attenuator, coaxial cable and user manual |
|
7. Attenuator JZ602
|
Impedance: 50 Ω Attenuation: 20 dB |
|
8. Attenuator JZ603
|
Impedance: 50 Ω Attenuation: 30 dB |
|
9.EDS 20H-PC Communication EDS 20H-REMOTE |
Realize the remote control function of the upper computer software to the instrument |
|
10.PC Software Corelab |
> Compatible with Windows 7, Windows 8 and Windows 10 operating systems; > support Ethernet interface and serial interface communication mode; > support scheduling testing, test sequence parameters and the key test, the operation is simple > can be set up customer information, automatic generation of test reports, and support the export of test report, the convenient user record data in real time; |
