New Product Release:Combined Type Automotive Transient Pulse Simulator Series TIS 100CXX
Introduction：
The TIS transient pulse interference simulator series integrates the power line testing of test pulses P1/2a/3a/3b required by ISO 7637-2 standard, as well as the signal and data line testing required by ISO 7637-3 standard. The TIS series simulator can not only meet the standard requirements of many global automotive manufacturers, but also customize various waveform simulation generators according to user needs. It has higher pulse voltage and frequency, can be freely set, and is used to find sensitive points of the tested object, far exceeding the requirements of the standard. The input of the built-in coupling network is connected to the outputs of the LDS 200 series, APS series, and APG series, and can serve as a unified central output port for the test equipment. Different simulators are interconnected by a data bus and connected to a remote PC via Ethernet to form a complete testing system.
Features：
> 5.7-inch color touch screen, front panel operation
> EUT load capacity 60 V, 60 A
> Power cord test pulse P1/2a/3a/3b
> Fast and slow pulse test for signal and data lines
> Equipped with DUT voltage and current detection and overcurrent protection functions
> Built in power switch
> Built in coupling network can serve as a unified central output (EUT) port
> Ethernet and RJ45 interfaces, used for PC remote control and printing test reports
Naming convention: Taking TIS 100C06 as an example
TIS ： Automotive Transient Pulse Conducted Interference Signal Simulator
100 ：Maximum voltage 1000V;
C ： Representing Current
06 ：Output current level, 06:60A 10: Output voltage level 100A
Naming convention:
For more information, please click: Combined Type Automotive Transient Pulse Simulator Series TIS 100CXX
