Ring wave interference on electronic line, control line and signal line can be caused by transient due to switch of mains and controlled switch or lightening strike. RWS 600 is designed to conduct immunity test for electronic and electrical device.
> 5.7 inch color touch screen front panel operation
> Ultra-compact simulator up to 6.0KV
> Internal three-phase CDN, current up to16A，AC 380V 16A；
> Internal failure alarming function
> Fully meet the immunity test requirements for enterprises and testing institutions
> Test scheduling function
|
General data |
|
|
Display screen |
5.7 inch TFT touch screen |
|
Power supply |
110V/220V, ±10%, 50/60Hz, default AC 220V 50Hz |
|
Fuse |
6A |
|
Max. Power consumption |
200W |
|
Size |
19 inch/6U |
|
Weight |
Approx. 35Kg |
|
Temperature |
15–35℃ |
|
Humidity |
45%–75% |
|
Air pressure |
86kPa–106kPa |
|
Technical parameters |
|
|
Output voltage for open circuit（PK1） |
0.25 kV–6.0kV ± 10% |
|
Oscillatory frequency for open circuit voltage（1/T） |
100 kHz ± 10% |
|
Front time for open circuit voltage（T1,10%-90%) |
0.5us ± 30% at PK1 |
|
Decay ratio for open circuit voltage |
40%<(PK2)/(PK1)<110% |
|
40%<(PK3)/(PK2)<80% |
|
|
40%<(PK4)/(PK3)<80% |
|
|
Front time for shot circuit current (T2, 10%-90%) |
≤1us at P1 |
|
shot circuit current（P1） for open circuit voltage(PK1) is 6000V |
500A ± 10% at 12Ω; 200A ± 10% at 30Ω |
|
Pulse interval |
1s-99s |
|
Number of test |
1-9999 |
|
Output impedance |
12ohm, 30ohm automatic switch |
|
Trigger mode |
Automatic, manual and external |
|
Synchronization |
0°-360°, 1° step or random |
|
Network path |
Internal L1, L2, L3, N, PE, automatic switch |
|
EUT voltage feature |
AC 380V, 16A；Max：AC 450V |
|
Test mode |
programmable setup of voltage, coupling path, phase angle and other parameters |
