Technical Data

Micro pulse module for test P1/2a

Test voltage

30 – 600V

Polarity

Positive/negative

Pulse wave form

1us/50us, 1us/2ms, 3us/1ms

Rise time Tr

0.5us – 1us, 1.5us – 3us without load

Duration Td

50us ±20% without load

12us ±20% without load

1ms ±20% without load

1ms ±20% with 50 ohm load

2ms ±20% without load

1.5ns ±20% with 10 ohm load

0.2ms 土20% without load

0.3ms 土20% without load

Source impedance

2ohm, 4ohm,10 ohm, 30 ohm, 50 ohm

Test times

1 - 9999

DUT voltage monitoring

10:1

DUT current monitoring

10A:1V

Pulse interval

0.2s – 60s

trigger

Automatic

Automatic release of the pulses

Manual

Manual release of a single pulse

External

External release of a single pulse

Battery switch trigger

0 – 10000ms off time, selectable,

output

DUT supply

central DUT output

coupling

to the battery line

decoupling

via diode and battery supply switch

serial connector

LAN Ethernet RJ45

external trigger

trigger occurs when the connector is closed; BNC connector

Technical Data

EFT/ burst module for test pulse3a/3b

Test voltage

25 – 700V

Polarity

Positive/negative

Pulse wave form

5/150ns into 50 ohm and 1000 ohm load

Rise time Tr

5ns±30% into 50 ohm load

5ns±30% into 1000 ohm load

Duration Td

150ns – 45/+45ns into 50 ohm load

150ns – 45/+45ns into 1000 ohm load

Source impedance

50 ohm

Pulse

1- 200

Test and Control (trigger circuit)

Trigger of bursts

Automatic, manual, external

Burst duration

50ms – 999ms

Test duration

Pulse frequency

0.1kHz – 200kHz

Output

Direct output

Via 50 ohm coaxial connector

(for tests using e.g. a capacitive coupling clamp)

Coupling mode

To the battery line(supply lines)

CRO trigger

5V trigger signal for oscilloscope

General Data

power supply

AC 110/220V, ±10%, 45-65Hz

temperature

15-+35 ℃

humidity

35%- 85% RH (no condensation)

size

450×600×177mm(4U cabinet)

Weight

20kg

network

built-in 60V/50A,75A,100Acoupling/decoupling network

short impulse overcurrent capacity is more than 200ms

input

DUT supply

DC from APS or APG series

pulse 5

DUT supply

output

input from LDS200

central DUT output terminal

coaxial output terminal

connect with capacitive coupling clamp(as per ISO 7637-3:2007)

Basic equipment

simulator, user manual, test report, warranty book, test cable, power cord, DUT power cord, ground wire, user test program, standard test program(level 1-4 as per ISO 7637-2:2011)

optional accessories

capacitive coupling clamp

load resistance for pulse calibration

Software(optional)

Software AUTO Lab for software

With PC installed WIN XP and WIN7, it can be easily operated to make the measurement, based on the customized test program. It can identify any device for AUTO Lab test with automatic configuration. It can easily generate test reports.