General Description
The EFT 500 series is the multifunctional test simulator for EFT/Burst with a built-in single phase or three phase coupling /decoupling network. It is designed to meet the requirements of electronic and electrical standards. Stable performance and good reliability make the EFT 500 an optimum standalone solution for both testing during development and final testing of products and sub-assemblies.
Features
5.7 inch color touch screen
Built-in single phase CDN (EFT 500S) and three phase CDN (EFT 500T)
Programmable setup of test parameters
Be able to connect high-current CDN up to
Ethernet, RJ45, PC remote control, test report documentation and print
As per:
IEC/EN 61000-4-4
IEC/EN 61000-6-1
IEC/EN 61000-6-2
IEC/EN 60601-1-2
IEC/EN 61850-3
IEC/EN 61326
ANSI/IEEE C62.41
|
General Data |
||
|
Display |
5.7 inch TFT color touch screen |
|
|
Power supply |
AC 110V/220V, ±10%, 50/60Hz±5% |
|
|
Fuse |
6A |
|
|
Max power consumption |
100W |
|
|
Memory space |
Infinite |
|
|
Communication mode |
Ethernet ,RJ45 |
|
|
External control |
D-sub 25p |
|
|
External trigger input |
BNC, 5V TTL |
|
|
CRO output |
BNC, 5V TTL |
|
|
Input |
BNC, 5V TTL |
|
|
Synchronization |
45-65Hz，20-500V between dotted terminal &undotted terminal |
|
|
0-500V among dotted terminal, undotted terminal& case |
||
|
Warning LED |
0-220V AC10A/0-48V DC3A |
|
|
Power depends on external signal lamp |
||
|
Safety circuit |
The test only can be started when it is closed |
|
|
Failure test |
Display on LCD and interrupt the work at failure case |
|
|
EUT Voltage monitor output |
BNC, 100:1 coaxial output |
|
|
Working indicator |
LED,LCD display |
|
|
Grounding connection |
Flat grounding line |
|
|
EUT power injection |
4mm banana line |
|
|
Output code |
1m coaxial cable |
|
|
Size |
19 inch/4 U |
|
|
Weight |
17kg |
|
|
Temperature |
15-35℃ |
|
|
Humidity |
45% - 75% |
|
|
EFT Electrical Fast Transients Burst as per IEC 61000-4-4 |
||
|
EFT Electrical Fast Transients Burst |
||
|
Standards |
IEC/EN 61000-4-4, GB/T 17626.4 |
|
|
Test voltage level |
0.25kV-5kV ±10% |
|
|
Polarity |
Positive, negative, alternative |
|
|
Source impedance |
50 ohm |
|
|
Pulse waveform |
5/50ns, 50 ohm, 1000 ohm with load |
|
|
Rise time |
5ns±30%，50 ohm, 1000 ohm with load |
|
|
Pulse duration |
50ns±30%, 50 ohm |
|
|
50ns-15/ +100ns, 1000ohm with load |
||
|
Spike frequency |
0.1kHz – 1000kHz |
|
|
Pulse duration |
0.075ms – 750ms |
|
|
Pulse cycle |
1ms – 9999s |
|
|
Test duration |
1s – 9999s |
|
|
Trigger |
Automatic , manual, external |
|
|
Synchronization |
0-360°,resolution 1° |
|
|
Built-in CDN for EFT 500 series |
||
|
Voltage range |
0.25kV – 4.8kV |
|
|
Attenuation ratio |
＜10% |
|
|
EFT 500S |
Built-in single phase CDN, AC 250V/16A， DC 110V16A |
|
|
Coupling mode |
L, N,PE and the combination |
|
|
EFT 500T |
Built-in three phase CDN, AC 380V/16A, DC 110V/16A |
|
|
Coupling mode |
L1,L2,L3,N, PE and the combination |
|
|
Other CDN can be customized. |
||
|
Accessories |
||
|
EFT coupling/decoupling network EFTN series comply with IEC61000-4-4 EFTN 3832T(three phase 380V32A) EFTN 6932T(three phase 690V32A) EFTN 38100T(three phase 380V100A) EFTN 6916T(three phase 690V16A) |
||
|
2. EFTC CCC signal line test |
||
|
3. Immunity test probe(electric field) E40 Immunity test probe(magnetic field) M40 |
||
|
4.EFT calibration set including TFB50/TFB 10000，network port, adaptor and case |
||
|
5. PC software EMSlab With PC installed WIN XP and WIN7, it can be easily operated to make the measurement, based on the customized test program. It can generate test report automatically. |
||
> Host a 1
> Manual 1
> Original test report 1
> Test Lead Set 1
> Power Line 1
> Fuse 2
Tel :4006 -0512-77
